PCPartPicker

  • Log In
  • Register

Build

Project Under the Rainbow - Parallel loop config Custom Build

by TettenMan

211
101 Comments

Details

Date Published

July 11, 2018

Date Built

July 13, 2018

CPU Clock Rate

3.7GHz

CPU Temperature While Idle

25.0° C

CPU Temperature Under Load

50.0° C

GPU Core Clock Rate

2GHz

GPU Effective Memory Clock Rate

11.5GHz

GPU Temperature While Idle

22.0° C

GPU Temperature Under Load

45.0° C

Description

Guys,

I'm back. Had this idea for a while, but had to wait until i received this new and awesome Lian Li pc011 dynamic case. A beautifull case that is great for building a custom loop.

Lots of options, lots of opportunities. Lots of potential.

The only downside, was the height of the case.

Specs are as followed:

Asus z370 Prime-A MB I7 8700k @5.3 ghz Gtx 1080ti @ 2000mhz Corsair pro ddr4 32gb @3000 mhz Psu corsair hx850i Ek z370 monoblock 2 x bitspower hexagon watertanks Bitspower 1080ti gpublock Ek xtop revo d5 rgb pump 2 x 360 hw labs rad and 1 x 360 bitspower levathian rad TT temp sensor and flow indicator 9 x 120 ll corsair fans 2 x corsair ledstrip 2 x commander pro Well go take a look at the pictures. Taken by an S8+ with hdr.

Hope you'll like them.

Ask anything you want, i'll try to reply as quickly as I can.

Oh and last but not least, don't forget to give me a vote (appreciate it)

Well all I can say is enjoy the pictures.

Comments Sorted by:

joshwhite 1 Build 4 points 2 months ago

I call a Feature! This is an epic looking build. So much going on, but absolutely love it! Great job man! How was it building in that case?

TettenMan submitter 5 Builds 1 point 2 months ago

It was a real challenge. But the dynamic is great for building a custom loop. Only disadvantage is the height of the case. Its a bit too low

MichealJoeden 1 point 2 months ago

I’m thinking about buying one and keeping it until my next build

MichealJoeden 1 point 2 months ago

Anytime I see a build with a colorful preview photo and Hardline tubing I already know it’s going to be a feature

TettenMan submitter 5 Builds 1 point 2 months ago

Not sure. My previous one was colourful and hardtube too but didnt get featured. It was an xboxpc that did

dixonerfais 1 Build 3 points 2 months ago

So many of these components are ones that I'm actually incorporating into a build I'm putting together in around a month or so. It's good to get a rough idea of what the finished product will look like. +1 insane build, man!

TettenMan submitter 5 Builds 1 point 2 months ago

Thx brutaaah. Good luck witj yours

CooproxXo1 2 points 2 months ago

I like that certain part of the build that has rgb :D +1

TettenMan submitter 5 Builds 2 points 2 months ago

There are lots of parts xd

EASTER_EGG 1 Build 2 points 2 months ago

O h b a b y

F E A T U R E P L E A S E

+1 7 4 8 5 9

TettenMan submitter 5 Builds 1 point 2 months ago

Help me out and share the link on social media ;)

EASTER_EGG 1 Build 2 points 2 months ago

YASSSSS

T3THYS 1 point 2 months ago

queen?

EASTER_EGG 1 Build 1 point 2 months ago

sure

Jhull13 1 Build 2 points 2 months ago

This is literally insane!! Unfortunately I’m unable to afford something like this

TettenMan submitter 5 Builds 2 points 2 months ago

Keep following your dreams like I did mine

Konorsacks 1 point 2 months ago

just keep saving you will ge there

Aquilian 2 Builds 2 points 2 months ago

Great build, congrats! +1

TettenMan submitter 5 Builds 1 point 2 months ago

Thx my man

AnonymouslyQuacked 1 point 2 months ago

+1 YEET!

TettenMan submitter 5 Builds 1 point 2 months ago

Thx man

Jourg 3 Builds 1 point 2 months ago

I like that I don't see a resevoir.. :D I really like that case, I'm definitely using that for my next build.

TettenMan submitter 5 Builds 1 point 2 months ago

There are actually 2 bitspower hexagons on the right who serve as a reservoir

Jourg 3 Builds 1 point 2 months ago

Ah yeah I noticed that after I posted my comment. It looks nice, giving me ideas. Thanks for sharing.

Hotsmithy2016 1 point 2 months ago

Just wondering why you didn't put the custom water cooling parts in the list? but still like the build.

TettenMan submitter 5 Builds 1 point 2 months ago

There are no options to do that. Ill add them in my description

Hotsmithy2016 1 point 2 months ago

you can do it by making it in custom but that is fine and nice build i cant judge myself since i don't even have a pc :(

TettenMan submitter 5 Builds 1 point 2 months ago

Thx for the info but I added it in my description ;)

har665 1 Build 1 point 2 months ago

That loop is something special, very different, and aesthetically awesome. I have to ask; did you have any trouble balancing the flow between the CPU and GPU?

TettenMan submitter 5 Builds 2 points 2 months ago

No issues at all. Flow is great

Parkithere 1 point 2 months ago

Those hexagon resorvores look dope, I also love the use of the little gpu block thing (idk the name LOL).

TettenMan submitter 5 Builds 1 point 2 months ago

Thx man. That is a bitspower vga multilink

Obamas.mama 3 Builds 1 point 2 months ago

I'm really confused by your loop coming from your gpu to the right, why does it look like a 16mm tube going into a 14mm tube?

TettenMan submitter 5 Builds 1 point 2 months ago

That aint a regular tube but a thermaltake flow indicator

Obamas.mama 3 Builds 1 point 2 months ago

How does it work? Usually flow indicators have little spindles that you can see

TettenMan submitter 5 Builds 1 point 2 months ago

There is a spindle in it. Zoom in on it and you ll see it

Obamas.mama 3 Builds 1 point 2 months ago

Oh... I had to look at your before coolant pictures, that's pretty pointless with white coolant isn't it?

drogina1 1 Build 1 point 2 months ago

Vote from my side also. The best build ever

TettenMan submitter 5 Builds 1 point 2 months ago

Thanks a lot Dejan. Mod on!

Air540 1 point 2 months ago

Please feature this beautiful build. I can tell you spent a lot of time planning it out. This is a piece of art and you have my vote for build of the year!

TettenMan submitter 5 Builds 1 point 2 months ago

Thanks a lot David. Appreciate the vote

jayl89 1 point 2 months ago

Fantastic build at a fairly reasonable price. :) I like this a lot better than the 7000+ builds.

My computer costs roughly the same but doesn't have any of your Rainbow glory lol.

TettenMan submitter 5 Builds 1 point 2 months ago

Hey thx man. This is only for the hardware stuff so without the lyquid cooling components

_Roller_ 1 point 2 months ago

Are the little black cable clamps from CableMod too? I assume the cables themselves are. Fantastic build, was thinking of buying this case for my next build.

TettenMan submitter 5 Builds 2 points 2 months ago

Yes clamps and cables are cablemod pro

TheNoobie 1 point 2 months ago

noice dude the pc look great keep on gaming

TettenMan submitter 5 Builds 1 point 2 months ago

Thx man appreciate your comment

cramstr 1 Build 1 point 2 months ago

What is that 'powered by Corsair' sticker?

TettenMan submitter 5 Builds 1 point 2 months ago

The PSU

Edition1 1 point 2 months ago

In your picture it says 250GB Samsung 970 EVO but you put 1TB version. Whatever, very nice build mate you deserve the feature.

TettenMan submitter 5 Builds 1 point 2 months ago

Yeah it is 1tb. I made a mistake. Dunno why 250 was in my mind

Edition1 1 point 2 months ago

No it clearly says 250gb in the picture. Change the M.2 SSD in your list to 250gb not 1TB.

TettenMan submitter 5 Builds 1 point 2 months ago

Hey man. There is definitely a 1TB in. The m2 in the picture was one that got delivered for my other build and the 1TB came later on cuz they were not in stock.

z1CHSR 1 point 2 months ago

also , dont forget to add the $300 worth of corsair fans

iW-ViTALiTY 1 point 2 months ago

Wow what a build! Excellent looking PC.

A+++

TettenMan submitter 5 Builds 1 point 2 months ago

Thx man , Wish I had this grade in school xd

griffinordonkey 1 point 2 months ago

Amazing Build Dude! Clean!!! If only I could build something like this :(

TettenMan submitter 5 Builds 1 point 2 months ago

Don't give up your dreams

griffinordonkey 1 point 2 months ago

yea Hehe

scarfxce 1 Build 1 point 2 months ago

I like the white rads on top and bottom with the black rad in the middle. Cool build all around just a little detail i appreciated

TettenMan submitter 5 Builds 1 point 2 months ago

The black is a Bitspower Levathian. It is one of the only rads that fits in the back of this case.

The whites are hardware labs 360 gts and are A+ products

Velocitron2000 1 point 2 months ago

So cool, the last picture is so satisfying.

TettenMan submitter 5 Builds 1 point 2 months ago

The back of the case with the cables?

Velocitron2000 1 point 2 months ago

Yea

DeadCarrot 2 Builds 1 point 2 months ago

This is insane.

+1

TettenMan submitter 5 Builds 1 point 2 months ago

Thx man

droem 1 point 2 months ago

WOW

This is amazing!

Good job on feature!

+1

TettenMan submitter 5 Builds 2 points 2 months ago

Yeah thx man. Finally a build that gets featured xd

Brianjc24 1 Build 1 point 2 months ago

I'm assuming the cpu is delidded?

TettenMan submitter 5 Builds 1 point 2 months ago

Yeah . That is a necessity when you buy an 8700k

NickRyanAPBT 1 Build 1 point 2 months ago

But still isnt getting 50c under 100% load. lol

Brianjc24 1 Build 1 point 2 months ago

I have an 8700k but have not delidded yet, I think I might have too.

sammys87gnxgta4 1 Build 1 point 2 months ago

Mind I ask, where did you get those cable combs?

TettenMan submitter 5 Builds 1 point 2 months ago

They were attached to the cablemod pro series

sammys87gnxgta4 1 Build 1 point 2 months ago

Ah, I see, thanks, more of a reason to get em I suppose.

joenguyen2 1 point 2 months ago

Any chance you could link the water cooling parts?

LameGenie 3 Builds 1 point 2 months ago

Holy **** that is sick!

Duckynoscope 1 point 2 months ago

Very nice build, but can you tell me what the coolant is?

TettenMan submitter 5 Builds 1 point 2 months ago

The coolant is lyquid.cool cfx opaque ghost white

supremecookie 1 point 2 months ago

nice build! what size tubing is that?

TettenMan submitter 5 Builds 1 point 2 months ago

Thx man. 10/12mm

supremecookie 1 point 2 months ago

Thanks mate, looking at your last pictures I couldn't see where you managed to hide the commander pro's?

TettenMan submitter 5 Builds 1 point 2 months ago

They are attached inside the hdd bay above the psu but you cant see it

supremecookie 1 point 2 months ago

ah good idea, thanks!

TettenMan submitter 5 Builds 1 point 2 months ago

2 commander pros, 2 led hubs and 1 lightningnode pro is in that bay so you cant see it and the back looks clean

HiResJunky 1 Build 1 point 1 month ago

Great build, super clean for a triple RAD setup. I love custom loops in this case. That's a great OC on the 8700k wish mine would hit 5.3!

xSUNNSHINNEx 1 point 1 month ago

Why did you use two commander pros vs daisy chaining a single with splitters and an an additional lighting node pro? Did you buy all the fans alone? Just determining best route for my build.

NishPat 1 point 1 month ago

God Damn! That's all I have to say!!

TettenMan submitter 5 Builds 1 point 1 month ago

Hehe thx

Boku 1 point 1 month ago

Great looking build! I am currently building something very similar. Do HW Labs GTS radiators fit where you have the Bitspower Levathian? Also, did you paint the fittings black?

TettenMan submitter 5 Builds 1 point 1 month ago

No hw labs doesnt fit there. The width of the rad may only be 120mm. Fittings are ekwb

rogdog56 1 point 1 month ago

Holy crap this is beautiful. I'm definetely getting those RAM sticks...

tony7127371737173271 1 point 1 month ago

nice

TettenMan submitter 5 Builds 1 point 1 month ago

thx man

noah.g1526 1 point 1 month ago

DAMN BOIIIIII

TettenMan submitter 5 Builds 1 point 1 month ago

:)

Bossthis 1 point 1 month ago

Nice

tooLzTR 1 point 1 month ago

What's the difference between the Z370-A VS Z370-E ?? I was gonna buy the E until I saw your setup ahah !

IngeniousTinkerer 1 point 28 days ago

What is this used for? And why only Windows 10 Home, not Pro? lol

RageBlazing 1 point 22 days ago

genuinely beautiful

[comment deleted]
[comment deleted by staff]
TettenMan submitter 5 Builds 1 point 2 months ago

Delidded and are average idle temps and average load temps

[comment deleted by staff]