Description

My primary rig.

Log in to rate comments or to post a comment.

Comments

  • 27 months ago
  • 1 point

Nice build dude, the only thing is the things red and the Windforce logo lights up in blue :P

  • 27 months ago
  • 1 point

haha, yeah, I know :) I can turn it off with nvidia led visualizer but this tool doesn't work on macOS. but, I start to like this blue led :)

  • 27 months ago
  • 1 point

How well does Nvidea stuff work on Mac because a lot of Macs use AMD?

  • 27 months ago
  • 2 points

my nvidia works great. I need to install nvidia web driver and everything works perfect.

  • 27 months ago
  • 1 point

Cool I don't know like anything about hackintosh haha

  • 27 months ago
  • 1 point

hah, I'm not an expert but here is a great guides on the net, like tonymacsx86 forum or similar ;)

  • 27 months ago
  • 1 point

Great looking build. Love the white/red cables. Clean cable management. My only question is why three SSD?

  • 27 months ago
  • 2 points

thanks mate! because I have triple boot (macOS, Win7 and Linux) and each system has its own format. easiest way for triple boot is 3 ssd's :)

  • 27 months ago
  • 1 point

gotcha! That makes total sense haha

  • 27 months ago
  • 1 point

Currently I own a NZXT Manta and I have to say, judging by the pictures: what a worthy successor!

  • 27 months ago
  • 1 point

thanks mate! yeah, this is the most beautiful case I've ever had :) manta is interesting too :)

  • 27 months ago
  • 1 point

Love the case and the build!!! Very nice case. Great job on wire management.

  • 27 months ago
  • 1 point

thanks mate :)

  • 26 months ago
  • 1 point

First off I really like the build. These little H200i's always look so clean and you nook looks cozy as well. Where/How do you get multi-color cabling like that? Do you just buy the individual precut cables and plug and solder them in?

And did you seriously pay $100 for thermal paste?? O_O

  • 26 months ago
  • 1 point

oh thank you! yeah, this is a super clean and beautiful case and every h200i build here looks great :) I start to build another rig for my gf in white h200i and I don't know which case is better :)

oh, of course not, this price from newegg is change so often. Thermal Grizzly cost me ~18€.

this is a custom sleeved cables (not extenders). I was order mdpc-x sleeve from icemodz and my friend make me a custom cables for my previous build. I used only gpu sleeved cables for this build. before h200i I had bitfenix phenom who is a great case but it doesn't have any cable management and I had to make this custom cables. sorry for my english :)

  • 23 months ago
  • 1 point

Awesome build! Did you have any problems with the motherboard installing MacOS? Also, did the wifi and bluetooth included with the board worked in the hackintosh?

  • 23 months ago
  • 1 point

thanks! both motherboard (VIII Impact and Z370-i) are super compatible with hackintosh. wifi and bluetooth is a biggest problem on hackintosh, but I don't use bt and wifi on my machines... if you have some logitech peripherals, they works perfectly with logitech unifying dongle. some people are enable this functions on another boards with some kext or hacks but I don't try this. take a look to the tonymacx86 forum and buyer's guide thread ;)

  • 23 months ago
  • 1 point

So, you use an ethernet cable instead of wifi?

  • 23 months ago
  • 1 point

yes, I'm always prefer lan connections.

  • 23 months ago
  • 1 point

How is the hackintosh performing?

  • 23 months ago
  • 1 point

sorry for late... hackintosh works very well. I use only intel mausi kext for lan, audio driver and nvidia web driver. I don't use bluetooth and wifi and I don't like any wireless peripherals.

  • 18 months ago
  • 1 point

Any problems with the noctua and the VRM heatsinks touching?

  • 18 months ago
  • 1 point

D15s is a monster but everything is fit without any problem.

  • 14 months ago
  • 1 point

So beautiful! Congratulations.

  • 14 months ago
  • 1 point

thanks :)

  • 12 months ago
  • 1 point

I took one look at that thing and said, "Oh my god. That thing is beast."

  • 12 months ago
  • 1 point

thanks mate :)

  • 7 months ago
  • 1 point

What type of GPU thermals you getting?

Absolutely love the idea

  • 7 months ago
  • 2 points

thanks! max gpu temps are ~80C in heavy loads and manually fan curve on some AAA games and 3440x1440 @ 100Hz monitor.

  • 6 months ago
  • 1 point

Amazing build. I've been planning a similar one recently but keep hearing people talk about how difficult it is to install the noctua d15 coolers (with chromax covers) along side read and top exhaust fans. Could you tell me about your expirience getting everything to fit together while building, and how you managed to get both top and rear exhaust fans, are they thinner than normal ? (most h200 builds with d15's I see don't have the top fan and a lot don't have the rear fan either). Also, do you have a fan mounted under the psu shroud to help pull air up into the case ?

  • 6 months ago
  • 1 point

Thanks mate! D15s have an asymmetric design and you can rotate it to be closer to the GPU slot and make space for the normal 25mm top fan. The standard 25mm rear fan is very close to the cooler fins and makes some weird turbulent noise. I tried a few fans but each has the same problem and I solved that with the Noctua slim A12-15. I have long T2 850 and don't have space for the fan under PSU shroud. The building is a little tricky but it's nothing you can't handle ;)

  • 6 months ago
  • 1 point

Awesome build! I'm planning a similar one right now. A few questions: 1) With the rear fan, is it possible that the "weird turbulent noise" was simply due to the fact that it was a low-quality NZXT case fan? (Like did you try a normal 25mm Noctua fan before settling on the 15mm one?) 2) Would you mind measuring the gap between the GPU and the front fans? 3) I'm assuming you have the top fan in exhaust configuration?

  • 6 months ago
  • 2 points

Hi, 1) as I said, I tried a few different 25mm fans, (noctua, eLoop and nzxt) and all these fans make a same noise. 2) there is no gap, Duke touches the front fans and I can't screw the bottom two screws on the fan bracket, I need only 2-3 mm, but I have no problem with that. 3) yeah, the top fan is exhaust.

  • 6 months ago
  • 1 point

Thanks for the response! 1) Interesting. I wonder why the NF-A15s don't make the same kind of noise, since they're also touching the cooler fins. 2) Good to know, that'll help me determine the maximum GPU length for my build. I don't understand what you mean about the bottom fan screws though - I can see them screwed in from the front in one of your pictures.

  • 6 months ago
  • 2 points

You're welcome :). 1) I don't know, probably because it's in between D15s fins and rear fan grill where is a stronger air breaking/turbulence. 2) The case has a front fan bracket that mounts with 4 screws. When the upper screws are wrapped, the lower ones cannot reach the hole because the GPU pushes the bracket. GPU length is 314mm. Sorry for my English, hope I was able to explain...

  • 6 months ago
  • 1 point

Hi.

Do you have any conflict between the Trident Z RAM height with the D15S cooler?

  • 6 months ago
  • 2 points

No, Trident Z's height is listed at 44mm and D15/s RAM clearance is 64mm.

  • 6 months ago
  • 1 point

Thanks bud.

  • 12 days ago
  • 1 point

nice