Description

This machine was pre-built to sell. With Dual AIOs and custom fan curves controlled by speedfan, it overclocks extremely well and runs extremely quiet. Zero issues with any of these parts and the customer was very satisfied.

Test results:

Quiet room 25°c 29db

Idle cpu 28°c gpu 30°c 31db

Superposition 1080p 1hr cpu 50° gpu 69° 34db

Superposition 4k 1hr cpu 50° gpu 69° 34db

Far Cry 5 1080p 1hr cpu 68° gpu 69° 34db

Far Cry 5 3440x1440 2hr cpu 68° gpu 69° 34db

Aida 64 1hr cpu 78° 40db

Log in to rate comments or to post a comment.

Comments

  • 13 months ago
  • 3 points

Sweet build! Would you mind sharing the brand of those acoustic wall panels?

  • 13 months ago
  • 2 points

Sweet build! What were your opinions on the Phanteks Eclipse P350X?

  • 13 months ago
  • 2 points

Really nice case for the price. I'd like to see one like it but a little higher quality. Maybe $90-$110 price point.

  • 13 months ago
  • 1 point

Good to know!

  • 13 months ago
  • 2 points

Very nice! Good success! Looks really clean. +1

  • 13 months ago
  • 2 points

+1 for the case, I really like the RGB on it.

  • 13 months ago
  • 2 points

This is absolutely awesome. Wonderful cable management (and cables), great part selection, and rather tasteful RGB. +1

  • 13 months ago
  • 2 points

Good looking build. Are these test results based on overclock performance?

  • 13 months ago
  • 2 points

Yes, CPU was at 4.7ghz boost clock for all cores. Gpu would usually sit right on 2ghz. It's capable of cooling even better and still be quieter than most, but I wanted a silent system.

  • 7 days ago
  • 1 point

What's the power draw on that CPU look like at 4.7ghz?

  • 13 months ago
  • 2 points

Your setup is really clean!

  • 13 months ago
  • 2 points

How long is your table? Just curious. Anyways, nice build!

  • 13 months ago
  • 1 point

Thanks. It's 8 feet long.

  • 12 months ago
  • 2 points

What is the purpose of the foam padding in the 6th picture sitting under the case? Does this not impact airflow for the power supply?

I love the look of the case; I'm wondering if you have any thoughts on airflow for a more traditional air cooling setup or CPU with liquid/rest with air.

  • 12 months ago
  • 3 points

Hi. It's a strip of sound deadening foam. At full load this computer was very quiet, so when the psu fan would spin up after awhile of gaming you could here the airflow noise echoing off the hard desk. It is only installed on the side facing you and the front. It dropped 2db on the meter under load and changed the pitch to where you don't notice it spin up at all. No reduced airflow, it still pulls air from 2 side.

This case has plenty of airflow for air or aio/air cooling. a 240mm aio like I have here with any gpu, blower style or open shroud. 2 intakes in the front, 1 exhaust in the back and one exhaust on top back and it'll be good to go.

The fan setup in this build is 2 intakes front, 1 intake top front, 1 exhaust rear.

  • 12 months ago
  • 2 points

Thanks for the info!

  • 12 months ago
  • 2 points

How is the cooler working? Is it good? I want to buy this but I’m debating in choosing the Thermaltake Riing 240 (everyone is saying it’s exceptional), the EVGA CLC 240 (also very good cooler based on reviews) and this, I’m trying to get a cooler that will run the 8700k to 5.0 ghz stable. Seeing some recent reviews of the chip, it’s not that hard, but then again I want my system to be quiet, and for my cpu to not exceed at least 75c. Thank you, I’m copy pasta-ing this to other people’s build with the quo’s mentiond above to get there opinions on it.

  • 12 months ago
  • 1 point

I have used this cooler on a couple of builds, and on both I upgraded the fans to BeQuiet! Silent Wings 3 PWM high speed fans. I haven't had any issues with them. For 5.0ghz under 75° the first thing you want is a motherboard with good power management so you can run lower voltages, and also upgrade the fans like I did. Delid is always an option also, but if you can run lower voltages then it's not needed. If 5hgz becomes an issues, 4.8 can usually be had at much lower voltages and almost no performance difference. If you look at my temps above, gaming temps for the cpu stay pretty low. So unless you do rendering, video editing, or stress tests the temps should stay pretty low. The MB really does make a difference though. I'm building on a AsRock Z390 Phatom Gaiming with an 8700k right now. It's at 4.8ghz all core boost clocks at under the stock cpu voltage I believe. I'll have to hook that one up and verify that.

  • 11 months ago
  • 2 points

Hi. Nice build. If you would change a motherboard what would you put instead? Reviews for AsRock are just too contradiction. Would you put z390?

  • 11 months ago
  • 1 point

Hi. Thank you. I actually just did a build with a AsRock z390 Phantom gaming itx/ac and an 8700k and it's a stellar board. Undervolted and overclocked. All the manufacturers have good and bad boards, you just have to read reviews and pick the one for you. Also remember that with user reviews, only a small % of happy users will take the time to leave a review, but a larger % of unhappy ones will take the time. MSI has some nice z390 boards right now also.

  • 9 months ago
  • 2 points

personal opinion but thats the best case with the amasing yet suttle rgb and +1 for the room looks sick

  • 9 months ago
  • 1 point

Thank you.

  • 13 months ago
  • 1 point

How much are you selling it for?

  • 13 months ago
  • 1 point

This sold back in Aug. on eBay for $2050.

  • 13 months ago
  • 1 point

Ok. So you said that you sold it for 2,050 dollars on ebay... How did you sell it for a cost lower than the price to build it? After all, the total here says $2,155.

  • 13 months ago
  • 1 point

That's the total for the prices that this site chooses. Not necessarily the prices that I paid.

  • 13 months ago
  • 1 point

I see. What kind of profit did you make then? XD

  • 13 months ago
  • 2 points

I usually make $150-250. I don't try and make a killing on them and I try and make sure customers get a high quality machine for their money. It's part time for extra cash here and there and fun, I love building and testing.

[comment deleted]
[comment deleted by staff]
  • 8 months ago
  • 1 point

Yes or 2 140m in the front 2 140mm in top and 1 120mm in rear.