• Log In
  • Register


White Knight

by Tisleet


I needed to name my custom build something cheesy, therefore "White Knight" was born. Now listen up, all jokes aside, I built this to play Fortnite. I originally started with a modest list, and slowly 1+ everything... I discovered that RGB is life, and if I look good I surely must play good. Turns out that is not true, I am still trash, but at least my PC game is on point.

Part Reviews

CPU Cooler

This white LED is so crisp, it makes all the other whites in the case look blue.


I wanted a simple motherboard, I could have purchased something fancier for like another $10. I didn't want RGB and crazy covers, or care for things like wifi. However, this bad boy is about as plain as it gets, the I/O panel is so flimsy and cheap looking.


The RGB color wave is very fluid and diffused.

Video Card

She runs cool and silent. Fans do not even kick on until 60c , it runs around 64c under load

Case Fan

I was hesitant to spend $120 on three fans, but these are LIT, literally. The RGB is very vibrant, and you cannot see the individual LEDs at all. Many neat color effects! However, I still think these are a little expensive for 120mm fans. Almost forgot, the module where you plug the fans in for sequential effects only has 6 inputs. I am not sure if you can expand beyond that, but my case for example has 7 fans.

Comments Sorted by:

HydraHunter77 4 points 3 months ago

OMG the cat in picture #5! IT'S SOOOOO CUUUUTEEEEE!!!!

Also nice build I guess +1


Tisleet submitter 1 Build 2 points 3 months ago

Thanks! She purrforms fairly well

HydraHunter77 1 point 3 months ago

Thx and I was being underdramatic. I love this build!!!



drgiorhodes 2 points 3 months ago


Tisleet submitter 1 Build 1 point 3 months ago

squat booty thicc

MichealJoeden 1 point 5 months ago

You should seriously consider upgrading your monitor, your gpu is more than capable of 1440p gaming. You should also overclock your cpu, and gpu, although your cpu cooler may not be able to handle 4+ ghz. Otherwise +1 for a clean looking build.

Tisleet submitter 1 Build 2 points 5 months ago

Thanks! I plan on upgrading the monitor, maybe around black Friday if I can set aside some money and find a deal. This is my first gaming PC, so I had to buy everything new including the peripherals.

EASTER_EGG 1 Build 2 points 5 months ago

It depends on your preference.

If you like a smooth gaming experience, pick a 1080p monitor with a higher refresh rate (100hz or higher). I believe they're easier to find and often maybe a bit cheaper.

But if you want to play with slightly higher pixel density (video quality) then just buy a high resolution monitor.

Good luck and +1, I love the build!

GizmoFTW 1 point 5 months ago

imo getting a 1080p144hz would be better.

NishPat 1 point 4 months ago

I'm gonna get one of those soon for future build.

Tisleet submitter 1 Build 0 points 5 months ago

I don't have a preference for 1080 vs 1440, but I definetly am looking to get a 144hz with gsync.

Badco2350 1 point 5 months ago

You did a very good job with this build. For sure room to upgrade in the future, but as far as what you did with what you have, outstanding! Love your color scheme and lighting!

Tisleet submitter 1 Build 1 point 5 months ago

Thanks! Im sure this goes for every build on here, but, it looks better in person. The pics make the case lighting appear blue, in person it's a crisp white with the blue accents. I'm happy with how it turned out, appreciate the feedback.

JamesCr 1 point 3 months ago

Does the Corsair water cooler come with thermal paste pre-installed?

Tisleet submitter 1 Build 1 point 3 months ago

Yes it did

alexcross 1 point 1 month ago

+1 nice build, just a newbie question. I'm planning to same GPU but i'm wondering how does people connect the 6pin calbe to PSU? original PSU Cable (8pin) then cable extension (6pin) to the GPU?

Tisleet submitter 1 Build 2 points 1 month ago

They are 6+2 cables, check out this link of my PSU, you can see in the cable photo what I mean. The extensions are nice because you can tuck the +2 from the 6 pin in the shroud, otherwise the +2 would just hang. https://www.evga.com/products/product.aspx?pn=220-G3-0750-X1

alexcross 1 point 1 month ago

cool thanks a lot!

GeneralLeoBlivious 2 Builds 1 point 24 days ago

Great looking build. So clean. Great job!

Tisleet submitter 1 Build 1 point 24 days ago

Thank you, it is as clean as I can possibly make it! I hope to attempt a custom loop in the coming months, that will be the true test!

Ryzin 1 point 16 days ago

Too clean... +1

Tisleet submitter 1 Build 1 point 14 days ago

Thank you!

chang1 1 point 13 days ago

Very nice! Would you recommend the motherboard? I'm having a hard time deciding if I should get the MSI Pro or if it's worth it to double the cost and go with an Asus prime.

Tisleet submitter 1 Build 1 point 12 days ago

I have had no problems with the board, does everything I need it to. I run it with the OC Genie vs a manual because of temps/noise, but I have manual overclocked and it works. Its a very basic looking board, but at the end of the day its half the cost and does the same thing lol

Tisleet submitter 1 Build 1 point 12 days ago

If I were liquid cooling and trying to push hardware to the limits I would consider a high end board, but for my use it gets the job done

blobburntya 1 point 9 days ago

Sick build dude. Looking at building something similar very soon here.

Tisleet submitter 1 Build 1 point 8 days ago

Thanks! I like it, no complaints on any of the parts really