|( 1 new from €89.00 . Last updated 5 minutes ago. )|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.fr at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
- 280 mm / 11.024" With Drive Cages
- 420 mm / 16.535" Without Drive Cages
- 470 mm x 210 mm x 465 mm
- 18.504" x 8.268" x 18.307"
Internal 2.5" Bays
Internal 3.5" Bays
- 45.895 L
- 1.621 ft³
- 15 points
- 5 months ago
from completed build A Mortgage Payment
Sleek, sexy and great bang for the buck. My only gripe and I was hoping the airflow issue was addressed with the new front panel, regardless of what Steve over at GN said, was exactly that. Airflow. If a front-mounted 360mm AIO is having some difficulty keeping CPU temps down then maybe they haven't. Still, it's nothing drastic and it works fine. I'm just saying, it could be better. I'm going to try some IC Diamond and Thermal Grizzly next to see what I can get. Failing that, we're going to a push/pull on the rad. I will update in the future how that goes.
Update: The push/pull config did make a difference in airflow. I'm showing a 5C drop at idle and package temp drop of 7C. Not too bad.
- 14 points
- 3 months ago
from completed build Ryzen 9 3900x, X570 Asrock Steel Legend and Phanteks P400A
This is a lovely looking case and well laid out inside. Building it up was easy. There is an add-on bracket you can buy to change how the graphics card is mounted and there is plenty of room for a large air cooler or AIO, but the AIO can only be front mounted as it will hit the heatsink and memory. The full mesh grille at the front lets plenty of air in. I do have concerns with the case mounted USB sockets on the top. There is nothing to stop debris or dust building up in them when they are not in use so a short circuit could occur sometime in the future.
- 6 points
- 2 months ago
from completed build Bifröst, the rainbow bridge to Valhalla
Really dig this case. Would love if it was 2-3cm bigger in every dimension. That would space the rear exhaust fan further from the IO shroud of the motherboard and create room for a top-mounted radiator. Besides that I will say that the metal is quite thin, but at this price point I'm not complaining too much. It's not an issue, just feels cheap when you work with it. Looks just fine once it's built and running, although fit and finish is far from perfect. There are a few places where plastic parts don't line up perfectly on my copy when they are meant to, but nothing you can really notice without getting up close and looking intentionally for imperfections.
- 5 points
- 2 months ago
from completed build Little Ripper_V1
Ive owned a couple other pc cases but this has become my new favorite, already planning a new build to try out in the white version, I may even opt for the digital version next time.
- 3 points
- 1 month ago
from completed build Hackin2020sh
This one may come down to a Greg Salazar vs. Steve Burke death match, but I gotta agree with Tech Jesus on this one: VERY cool (even overclocking a 9700K to 5.0GHz & pushing it up to 85° cools right down precipitously THE MOMENT the load is cut off, down within seconds to 40°~ish. That’s with Gigabyte stock Smart Fan 5 settings, and a total of 4 case fans (two stock DC fans, one of which moved to front bottom, other left as back outflow + two PWM MetallicGear Skiron 120s at top front) & a dual-PWM-fanned Arctic Freezer 34 eSports Duo air cooler. Meanwhile, a high-power Sapphire Pulse RX 580 8GB at full load never got above 70° at highest load! So, I like the P400 looks, the front mesh holes are NOT too small to get air inside (Sorry, Greg!), and until/unless I get a hotter CPU that needs a taller (than 160mm) cooler, I am happy with this case!
- 1 point
- 6 days ago
from completed build First time builder, long time enthusiast.
The overall design and case is great. I was looking for something with a sleek design and a mesh front for great airflow. It does just that. For it's price I think it's a solid case. I did have issues with the back panel. This case forces you to cable manage as there isn't much room for bulky cabling.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters