I updated to Bios to make sure but I can't remember if it was necessary
Airflow is a little restricted with the way I've set up my PC but I don't do heavy loads all that often so it's okay
I absolutely agree. I didn't mean to blame it on the motherboard, my mistake.
The Motherboard is doing fine imo. Temps are good. I use the Prism stock cooler and it's doing its work, it's a little loud so I might think of swapping it out for a liquid cooler in the future
Unless I've missed it, I don't think so
Didn't have any issues. Had to set them to 3200mhz through the bios, almost every setup guide explains how
I wouldn't know to be honest. I haven't looked much at other cases because they didn't look good enough to me.
I have. BUT, it's pretty much fixed. I simply turned off some useless settings and it was fixed. I also think they just released new drivers that should've fixed everything.
CPU temp while idle is around 38-45. GPU around 55. Don't know what temps are at full load, haven't properly tested it yet.
I have no clue, sorry. I borrowed the camera
Thanks! I'm not very pleased with the cable management but I couldn't do any better because the sleeved cables were really difficult te bend.
Thanks! These cables make a big difference for just €30. I guess it depends on what you spend on the rest of the computer. If your total budget is 600 then 30 is alot. At 1500 not so much
Thanks! I borrowed a semi professional camera from my girlfriend, my phone doesn't make these quality pictures unfortunately
Are you sure you have the RAM sticks in the correct memory slots? I'm not an expert but I've always been told when you use dual memory they should be 1 slot apart
Would've saved a bit of money on the PSU and Mobo to spend some more on the GPU/SSD